Ceramic
发表于 2025-3-23 11:44:52
http://reply.papertrans.cn/15/1441/144005/144005_11.png
Coterminous
发表于 2025-3-23 14:51:38
http://reply.papertrans.cn/15/1441/144005/144005_12.png
表主动
发表于 2025-3-23 21:59:21
https://doi.org/10.1007/978-3-658-16330-3 from simple fetal phones to very sophisticated imaging systems. The main advantage of ultrasound when applied to diagnostic is that it is non-invasive. In Cardiology, the ultrasonic Doppler detector is a very useful instrument to monitor blood flow, this detector measures the blood velocity in vein
endocardium
发表于 2025-3-24 00:57:12
https://doi.org/10.1007/978-3-658-16330-3properties of solids (microacoustical technique). The probe beam is originally formed in a coupling fluid and penetrates in the solid body as convergent beams of longitudinal and transverse elastic waves. Primary and repeated reflections at the front and back object surfaces give rise a series of ti
Intend
发表于 2025-3-24 03:51:09
http://reply.papertrans.cn/15/1441/144005/144005_15.png
破布
发表于 2025-3-24 06:49:28
https://doi.org/10.1007/978-3-658-16330-3mposites. Four continuous fiber ceramic composites (CFCC) samples, subjected to fatigue damage, were studied by scanning acoustic microscopy. The damaged samples were inspected by the high-frequency Ernst Leitz Scanning Acoustic Microscope (ELSAM) and the lowfrequency time-resolved acoustic microsco
conflate
发表于 2025-3-24 11:55:58
Personenbezogene Recherchen – Doxing wave injected into the medium. As a result, the image obtained normally provides information on some linear elastic parameters or flaws responsible for sound transmission and reflection inside a sample. Imaging of local elastic nonlinear properties has always been a challenging task with possible p
DOSE
发表于 2025-3-24 17:01:23
Untersuchung von Kontrollservernies broadens. Adhesive bonding becomes the primary or secondary means of joining when widely dissimilar materials are used to form an assembly. Adhesive bonds are often used in secondary joining applications with welds or rivets, to enhance stiffness, reduce corrosion, improve load distribution and
责怪
发表于 2025-3-24 20:44:02
Untersuchung von Kontrollservernused because it can be used to measure both the thickness of various media and the differences in acoustic impedance between different regions within a given volume. An area of interest is the measurement of the change in density of materials. An example in paper products is the use of watermarks, w
慌张
发表于 2025-3-25 00:25:55
Personenbezogene Recherchen – Doxingair. The temporal pattern for deposition of heat can be a pulse, a burst, or a sinusoidal modulation. In the latter case this technique is named “lockin-thermography” since it imitates photothermal radiometry (where a lockin-amplifiier was an important tool) in a spatially multiplexed way where a th