instulate
发表于 2025-3-23 09:49:29
http://reply.papertrans.cn/15/1430/142934/142934_11.png
cliche
发表于 2025-3-23 14:51:56
0254-1971 n the latest developments research results and industrial experience in the field of machining of conventional and advanced materials, high speed machining, forming, modeling, nonconventional machining processes, new tool materials and tool systems, rapid prototyping, life cycle of products and qual
完成
发表于 2025-3-23 21:29:21
https://doi.org/10.1007/978-981-15-7047-6nventional and new materials, machining for near-net-shape parts, new approach in machining titanium based alloys, high speed machining — high speed hobbing and high speed broaching, nonconventional processes, microfabrication and submicron manufacturing — nanofabrication are presented.
亲爱
发表于 2025-3-24 00:19:31
http://reply.papertrans.cn/15/1430/142934/142934_14.png
对手
发表于 2025-3-24 04:49:32
https://doi.org/10.1057/9780230376540se at the end of a product life. Eco-sustainable technologies shall be faced with a global monitoring as a summa of sub-monitoring and pre-monitoring activities, together with “ad hoc” simulation tools. New methods of costs auditing should be structured, involving the whole product life cycles where likely new business areas could arise.
ovation
发表于 2025-3-24 06:41:54
https://doi.org/10.1057/9780230376540oatings in turning therefore is investigated..Burnishing operations are useful to improve surface and subsurface properties of the machined part. The effect of the rolling force being the most influencing rolling parameter is presented. Rolling-in ceramic particles in the surface is discussed for improving wear resistance.
半导体
发表于 2025-3-24 11:37:06
The Genesis of Arab Nationalismt (2 mm). Surprisingly, the new ceramics surpass CBN tools on discontinuous and interrupted conditions..The behaviour of pure submicrometre alumina tools is compared with new Al.O./Ti(C,O) composites of the same grain size and with advanced commercial grades.
废墟
发表于 2025-3-24 17:01:50
The Genesis of Arab Nationalismthermal and mechanical stresses on the cutting material when tools are ground, the finite element method is employed. This involves demonstrating connections between the grinding of tools on different conditions and the later wear behaviour of the tools when in use.
钢笔记下惩罚
发表于 2025-3-24 22:20:20
http://reply.papertrans.cn/15/1430/142934/142934_19.png
遍及
发表于 2025-3-24 23:59:45
http://reply.papertrans.cn/15/1430/142934/142934_20.png