abnegate
发表于 2025-3-30 08:18:07
http://reply.papertrans.cn/15/1427/142658/142658_51.png
SPASM
发表于 2025-3-30 14:50:39
http://reply.papertrans.cn/15/1427/142658/142658_52.png
depreciate
发表于 2025-3-30 17:38:40
http://reply.papertrans.cn/15/1427/142658/142658_53.png
易弯曲
发表于 2025-3-30 22:40:27
http://reply.papertrans.cn/15/1427/142658/142658_54.png
homeostasis
发表于 2025-3-31 02:58:34
Modelling of Structural Systems,tion of complex and customized parts quickly, with low production costs and little material waste. However, the mechanical resistance of the parts produced by this manufacturing method vary greatly according to printing parameters, especially when they are not bulk solid. It was observed in this wor
毕业典礼
发表于 2025-3-31 07:20:18
https://doi.org/10.1007/978-94-007-2733-5f Additive Manufacturing (AM) processes, these features can be produced with less material waste and with wide design possibilities by applying a ‘near-net-shape’ technique. Although, the AM parts require post-processing techniques to reach the required material properties, dimensions, and surface r
恫吓
发表于 2025-3-31 12:05:05
http://reply.papertrans.cn/15/1427/142658/142658_57.png
清真寺
发表于 2025-3-31 15:36:39
https://doi.org/10.1007/978-3-319-21506-8 satisfactory mechanical strength and wear resistance under elevated loads. Hardened steels present suitable properties for these applications, thus, manufacturing processes must be capable of dealing with these characteristics to produce high quality components. The aim of this work is to investiga
ordain
发表于 2025-3-31 18:40:06
http://reply.papertrans.cn/15/1427/142658/142658_59.png
cavity
发表于 2025-4-1 00:32:32
https://doi.org/10.1007/978-3-031-43555-3Additive Manufacturing; Subtractive Manufacturing; Manufacturing processes; Union Processes; Metallurgic