Tempor
发表于 2025-3-23 12:01:37
http://reply.papertrans.cn/104/10311/1031065/1031065_11.png
WAX
发表于 2025-3-23 14:54:34
http://reply.papertrans.cn/104/10311/1031065/1031065_12.png
Incorruptible
发表于 2025-3-23 18:23:36
http://reply.papertrans.cn/104/10311/1031065/1031065_13.png
冰河期
发表于 2025-3-24 00:30:59
http://reply.papertrans.cn/104/10311/1031065/1031065_14.png
interpose
发表于 2025-3-24 04:31:13
ShapingTo examine the problems of machining dovetail slides and the function of the clapper box, particularly on the 60° inverse face. Also to test a method of accurate measurement of the slide contact faces.
GLOOM
发表于 2025-3-24 10:20:28
http://reply.papertrans.cn/104/10311/1031065/1031065_16.png
预测
发表于 2025-3-24 14:09:40
Marking-outTo check the degree of accuracy obtainable by marking-out with a vernier height gauge, and to position the locations of machining areas, thus saving setting and machine loading times.
OTHER
发表于 2025-3-24 16:48:53
Spacing holes on a pitch circleTo show the potential of hand skills: power hand drilling, marking-out.
JOT
发表于 2025-3-24 23:04:11
Marking-out, drilling and reamingTo show the potential of hand skills: spacing holes accurately, obtaining a good finish and close dimensioning of hole diameter.
Density
发表于 2025-3-25 01:39:34
http://reply.papertrans.cn/104/10311/1031065/1031065_20.png