ARY
发表于 2025-3-25 04:51:52
http://reply.papertrans.cn/11/1009/100809/100809_21.png
CLOT
发表于 2025-3-25 08:00:39
http://reply.papertrans.cn/11/1009/100809/100809_22.png
发生
发表于 2025-3-25 14:24:55
http://reply.papertrans.cn/11/1009/100809/100809_23.png
同时发生
发表于 2025-3-25 16:54:48
Gjerrit Meinsma,Arjan van der Schaftsch Hawthorne formulation (splitting the velocity into a potential and a rotational part) and using a finite element discretization..This paper presents a description of the method and analyses the results obtained with 2 different inlet data sets (experimental velocities and corrected velocities corresponding to measured flowrate).
彻底检查
发表于 2025-3-25 21:20:59
http://reply.papertrans.cn/11/1009/100809/100809_25.png
矛盾
发表于 2025-3-26 02:19:54
http://reply.papertrans.cn/11/1009/100809/100809_26.png
表否定
发表于 2025-3-26 08:00:31
https://doi.org/10.1007/978-3-322-89452-6Profil; calculus; design; finite element method; fluid mechanics; geometry; mechanics; model; simulation; tur
glamor
发表于 2025-3-26 11:27:07
http://reply.papertrans.cn/11/1009/100809/100809_28.png
纪念
发表于 2025-3-26 14:27:42
http://reply.papertrans.cn/11/1009/100809/100809_29.png
缺陷
发表于 2025-3-26 18:35:30
Completeness Theorem and Model Theory,Measured flow profiles in a model turbine have inevitable measuring errors even with the most careful measuring technique. It is normal practice, therefore, that the measured data are normalized to conserve discharge, angular momentum and total specific hydraulic energy.