起皱纹
发表于 2025-3-25 06:20:51
https://doi.org/10.1007/978-3-031-22963-3operties (Bertoldi et al. in Nat Rev Mater 2:17066, 2017). Mechanical metamaterials are man-made structures with customized mechanical properties governed by rationally planned architectures rather than chemical compositions.
SOB
发表于 2025-3-25 11:14:49
Pratish Datta,Tapas Pal,Katsuyuki Takashimampetitiveness in the industrial sector is gaining interest. Modern technology, such as the fused filament fabrication (FFF) method, provides dependable and affordable alternatives. More material flexibility and the ability to produce goods with geometrical restrictions at low cost and with shorter p
小鹿
发表于 2025-3-25 14:58:15
3D Printing of Composites978-981-99-1730-3Series ISSN 2524-5384 Series E-ISSN 2524-5392
涂掉
发表于 2025-3-25 18:55:55
http://reply.papertrans.cn/11/1008/100772/100772_24.png
狂乱
发表于 2025-3-25 20:53:01
https://doi.org/10.1007/978-3-031-22963-3operties (Bertoldi et al. in Nat Rev Mater 2:17066, 2017). Mechanical metamaterials are man-made structures with customized mechanical properties governed by rationally planned architectures rather than chemical compositions.
ABYSS
发表于 2025-3-26 03:39:16
Mrityunjay Doddamani,H. S. Bharath,Suhasini GururaCovers novel lightweight feedstocks for 3D Printing.Deals with the unique approach of manufacturing sandwich composites.Describes wide materials choices available for 3D Printing industry
确定无疑
发表于 2025-3-26 05:04:27
Materials Horizons: From Nature to Nanomaterialshttp://image.papertrans.cn/012/image/100772.jpg
弄皱
发表于 2025-3-26 09:43:08
A Geometric Approach to Linear CryptanalysisNew materials are necessitated by the increasing performance expectations of modern technological applications. It is challenging to meet much higher and more detailed quality criteria with single materials. As a result, composite materials are created by combining two or more conventional materials to generate a unique combination of qualities.
REP
发表于 2025-3-26 14:16:36
https://doi.org/10.1007/978-3-030-92062-3To make lightweight thermoplastic syntactic foam composites, hollow glass microballoons (GMBs) are employed as fillers, and high density polyethylene (HDPE) is used as a matrix. The sections that follow go over these components in further depth.
一骂死割除
发表于 2025-3-26 19:18:13
Advances in Cryptology – ASIACRYPT 2022MFI estimates material flowability. Melt flow rate refers to the rate at which thermoplastics are extruded through an orifice at a specified temperature and load. ASTM D1238 is used to estimate MFI of H-H60 pellets by using Dynisco LMI5000 (Fig. 4.1).