是剥皮
发表于 2025-3-26 22:20:09
http://reply.papertrans.cn/11/1008/100767/100767_31.png
CHOP
发表于 2025-3-27 01:59:12
Cristian Lorenz,Tobias Klinder,Jens von Bergy there were neither sufficient stockpiles nor sufficient manufacturing capacity early in the pandemic. This chapter outlines some practical experiences in rapid implementation of stopgap solutions for respiratory support in the clinical setting.
毕业典礼
发表于 2025-3-27 07:29:06
https://doi.org/10.1007/978-3-642-36441-9ategic equipment distribution, and preparation for use. Sterilization of equipment is important for first use and for reuse. While local variations in sterilization procedures exist, this chapter outlines the general approach to 3D printed equipment disinfection with regards to the intended use, material components, and reuse potential.
Crater
发表于 2025-3-27 09:26:40
Book 2021es for healthcare, including medical and non-medical devices, and to improve the quality of life for patients with COVID-19 and those who care for them. It shows how 3D printing became vital during the pandemic due to its broad availability and the inherently digital nature of the work that enables
Fluctuate
发表于 2025-3-27 16:33:06
Book 2021 from a medical perspective, additional input from medical engineers, administrators, attorneys, and public safety officials enables a broad perspective to highlight some of the ingenuity from the North American 3D printing community who responded to the initial case volumes of COVID-19. .
Malleable
发表于 2025-3-27 19:48:59
Virtualizing the Temple of Bayonologies should be used in place of 3D printing. However, in the temporal window of the COVID-19 pandemic where there have been critical shortages of medical supplies, 3D printing has been globally used to produce stopgap medical and non-medical devices, based on dedicated operators of broadly available 3D printers.
龙虾
发表于 2025-3-27 22:50:15
http://reply.papertrans.cn/11/1008/100767/100767_37.png
增减字母法
发表于 2025-3-28 02:54:45
Calcul des variations et points critiques,impact in extending the life of existing equipment, supporting the reuse of critical components, and replacing key equipment in worst case scenarios. This chapter discusses the experiences of practical implementation of a rapid 3D printing response for respiratory support apparatus.
HATCH
发表于 2025-3-28 07:33:14
http://reply.papertrans.cn/11/1008/100767/100767_39.png
爱了吗
发表于 2025-3-28 13:28:30
, and public safety officials enables a broad perspective to highlight some of the ingenuity from the North American 3D printing community who responded to the initial case volumes of COVID-19. .978-3-030-61992-3978-3-030-61993-0