barium-study
发表于 2025-3-23 12:39:01
http://reply.papertrans.cn/11/1008/100756/100756_11.png
无政府主义者
发表于 2025-3-23 14:00:17
http://reply.papertrans.cn/11/1008/100756/100756_12.png
Inoperable
发表于 2025-3-23 21:43:37
Nutrient Transport by the Invertebrate Gut,ation method ANOVA was used to decide the optimal levels and to find the percentage of contribution of the process parameters. The results show that the Laser power is the most important factor followed by the Bed Temperature and Layer thickness for maximizing the Length and Depth, Minimizing Surfac
聋子
发表于 2025-3-23 23:11:42
Fabrizio Colombo,Jonathan Gantnerted 3D solid model is translated from virtual to physical model by using additive manufacturing process. Here FDM process is used. A designer can then use hand tools to form the model by carving, shaping, and joining additional material. In this paper, a broken and damaged gear wheel of rotating mac
出生
发表于 2025-3-24 05:13:48
Francesca Chiaromonte,Kateryna D. Makovao conventional manufacturing technologies such as melting, casting, rolling, forging, etc., AM technologies produces materials with low cost production. An attempt has also been made to study the influence of AM and its direct impact on Indian GDP. Moreover, this detailed analysis would benefit vari
DRILL
发表于 2025-3-24 06:50:26
A. Priou,A. Sihvola,A. Vinogradov problems are observed and identified through Pareto analysis that on the machine, the non-sticking of the preliminary layers to the hot bed occurred more, thus solutions are provided to avoid this problem which in turn has helped to reduce various other problems occurring while printing the 3D obje
织物
发表于 2025-3-24 12:08:24
E. A. Evdischenko,A. F. Konstantinovamal levels and percentage of influence of each parameter. The results postulate that the bed temperature is the main key factor followed by the part orientation and layer thickness for optimal value of the hardness and ultimate tensile strength of the SLS processed. This optimized value serves as a
调味品
发表于 2025-3-24 17:53:46
http://reply.papertrans.cn/11/1008/100756/100756_18.png
慎重
发表于 2025-3-24 20:07:31
Enhancing Surface Finish of Fused Deposition Modelling Parts,978-3-658-41481-8
尽管
发表于 2025-3-24 23:44:07
Development and Analysis of Accurate and Adaptive FDM Post-finishing Approach,978-3-658-25349-3