专横 发表于 2025-3-25 06:29:16
https://doi.org/10.1007/978-1-4614-5511-0wever, these methods rely heavily on the quality of measured airway pressure and flow profiles for reliable respiratory mechanics estimation. Thus, asynchronous and/or spontaneous breathing cycles that do not follow a typical passive airway profile affect the performance and reliability of model-basDNR215 发表于 2025-3-25 07:49:48
http://reply.papertrans.cn/11/1007/100613/100613_22.png音乐学者 发表于 2025-3-25 14:47:57
D. Minola Davids,C. Seldev Christopherhoulder, wrist and hand injuries. These problems call for a device that reduces injury risk factor owing to a prolonged wheelchair use while simultaneously increasing user independence and mobility. The study suggests a modified wheelchair design that operates by means of a pulling motion as opposedmurmur 发表于 2025-3-25 17:38:20
http://reply.papertrans.cn/11/1007/100613/100613_24.pngProsaic 发表于 2025-3-25 22:44:00
Mala Sundaram,Gitapremnath Raja,Vimal Pant we have developed a soft fabric based tactile sensor which is incorporated with a 3D printed robotic hand for rehabilitation uses. Various types of tactile sensors were made with differences in the conductive material used. Conductive thread and conductive fabric based sensors were fabricated withethnology 发表于 2025-3-26 01:32:53
https://doi.org/10.1007/978-981-15-5341-7ed into two categories included monoaxial and polyaxial constructions. Although the polyaxial screws were common used owing to it can provide more degree of freedom on the screw-to-rod connection to facilitate rod seating. However, the complexity of structural design may reduce their mechanical streGlycogen 发表于 2025-3-26 05:04:00
Efficient Data Cube Materialization,stand (STS) manoeuvre is an important and practical indicator of functional independence in SCI individuals. One of the factors that contributes to STS movement is arm support. The objective of this study is to instrument an arm support with pressure sensors, and to analyse the impact of using standLIMIT 发表于 2025-3-26 10:24:54
Banty Tiru,Rubi Baishya,Utpal Sarmay using an Arduino controlled transmitter and receiver. The prototype consists of two parts; the transmitter is placed on the green traffic light and the receiver which is held by the user. The transmitter sends the traffic light signal status and information on wait duration by broadcasting them ou沉思的鱼 发表于 2025-3-26 14:19:23
http://reply.papertrans.cn/11/1007/100613/100613_29.pngmedieval 发表于 2025-3-26 20:22:34
http://reply.papertrans.cn/11/1007/100613/100613_30.png